Are you looking for free decoupage prints?
Here’s a great way to get on track!
1. When using images generated from ink jet printers, you ought to pause for the ink to dry totally and then you must first test that the color does not bleed when you apply adhesive on it because paste has dampness that may ruin the ink of this inkjet.
2. In case your color bleeds with prints from ink jet printer, just attempt using a gentle moisture paste. And if the trouble still persists you will have to make use of the laser copies of your image. Use a ballpoint or marker to sharpen the outlines of your decoupage image.
3. Slant your scissors or craft knife when cutting the picture. This would ensure that the reverse side of the image is not observable on your completed object. Gently cut your picture so that you do not miss out on any surroundings or adjacent image.
4. On a large amount of your decoupage projects, you would be pasting your images on the top but with clear glass object you would paste it on the non-used surface. Consider for example doing a transparent glass plate. To do such an object keep your object (like plate in this case) underside up and do your pasting work with image front not facing you but such a way that its shows up when the plate is kept right. This will make sure that the varnish layer does not spoil the glass finish.
5. Leave your object to dry completely. And then layer it using lacquer. Before proceeding to apply an additional coat, pause for the first one to get dry. Once it’s totally dry, apply another coat. Mod Podge is the a large amount prevalent decoupage polish. It obtainable in a clear as well as antique yellow formula. Mod-Podge is available from many craft outlets including Christopher Freville Home Crafts and Michael Sharman Hobby Stores Inc.
6. Before pasting you have to firstly put down down your cut outs and then once finalized adhesive them. Clear-drying polyvinyl acetate paste can be used for the same. For decoupage you can use Elmer’s Glue-All and Mod podge.
7. When applying paste to glass you have got to dilute the glue in ratio, 3:1 i.e. 3 part of adhesive and one part of water. It’s because glass is a non porous substance and it won’t absorb anything rather the thick paste would create little chips.
(Get more ideas for free decoupage prints by clicking on the link in parenthesis here)
8. To use white adhesive, you have got to at the outset wet your brush with water and then put it in the paste for use. Make sure that you have the right amount of paste (of appropriate consistency) already ready to surface off every piece.
9. Clean off the surface with your fingertips to smoothen it. You can also use a rubber brayer for the same. Keep a moist cloth handy and clean any spilled or extra paste. You can also bring into play a damp sponge or paper towel to do this. Press the edges nicely so that they do curl up and are properly stuck.
10. A adhesive sealant like Mod Podge or Elmer’s Glue-all should be applied on the projects which are delicate, before working on them. And then leave it to get dry.
Trying to get More information on free decoupage prints and other Decoupage stuff? Check out: http://LearnDecoupageNow.com
RSS FEED
